b'240 $ All Prices in Propeller InstallationCanadian Dollars $Prop Shaft Pins#52502-0001 3/4" & 7/8 shaft1/8 x 3/4"$ 2.00#52502-0002 1" & 1-1/2 shaft1/8 x 1"$ 2.00#52502-0003 1-1/8"shaft5/32 x 1-1/4"$ 2.00#52502-0004 1-3/8" shaft5/32 x 1-1/2"$ 2.00Bronze Propeller Shaft Castle Nuts#52501-00013/4" shaft$ 16.00#52501-0006 1-1/2 shaft $ 34.00Brass Shaft KeysCut to correct length for shafts from 3/4" diameter to 1-3/8 dia.#52503-00013/16 $ 6.00#52503-00021/413.00#52503-00035/166.50Propeller Installation KitIncludes 1 nut,1 check nut, appropriate cotter pin and shaft key.#1788For 3/4" dia. shaft$16.45#1789For 7/8" dia. shaft 22.95#1790For 1"& 1-1/8" dia. shaft43.95#1791For 1-1/4" dia. shaft 41.95#1792For 1-3/8" dia. shaft 53.95Braided PackingSquare style braided packing is required for all our shaft and rudder stuffing boxes. This material is manufactured of all natural compounds; it resist heat build-up and will not score or mark the shaft. ] Marine hardware provides wax impregnated flax packing, which has an excellent performance record over many years in a wide variety of applications. A break-in-period is recommended on all new installations, during which excessive water leakage is allowed for two hours. This water flow allows the packing to conform to the surface finish of the shaft and water to infiltrate all the voids of the packing for effective heat dissipation even after the unit has been tightened to its final seal. Replacement packing material is sold in2 foot lengths, enough to wrap 3 bands around any shaft up to 2 inches in diameter. To comply with all industry standards, it is recommended to cut on 30 angles and stagger the joints in the stuffing box, as illustrated. Stuff Box Packing Graphite Packing for propeller shafts and rudder shafts.Uniformley square braided with a lubricant and waterproofing com-pond.Not for use in salt water.Flax packing is surface graphited: will bear pressures to 2000psi and temperatures to 150F.#58200-00011/8" x 24" long $ 16.50 For fresh water boats, #58200-00023/16" x 18" long 16.75 Graphite packing=less #58200-00031/4" x 18" long17.50 Friction.Graphite packing is not acceptable for salt water #58200-00045/16" x 18" long 19.50 boats.See previous page for #58200-00053/8" x 18" long18.00 fresh water packing240 email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639'