b'Rigging Fittings $ All Prices in 417Canadian Dollars $Dual Tack PointThe advantages of dual tack points and versatile mounting have been incorporated in this single fitting. It is also shorter than most tack point systems, therefore allowing maximum lift on the sail. Its construction is of welded 300 series stainless steel, which has been tumbled, and electropolished. Made in two sizes to fit a wide range of boats. Can be mounted on either stem plate or boom. Cat No. Price Main ShaftHornHeight GrooveHole Size Stock Width SizeNE24-17 $ 25.00 7/8 3/8 2-1/2 1/4 5/16NE24-28 22.00 3/4 5/16 2-1/2 1/4 1/4"MOUNTING METHODSShroudrollerShroudroller, a hollow, two-piece, self-locking system, has several unique features. The mating parts are extruded of ABS plastic (ultraviolet inhibitors added) with a patented easily assembled joint that makes installation a two-minute job. (Turnbuckles do not have to be removed for installation!) The full-length bearing surface of the roller, together with its plastic composition, allows the Shroudroller to spin easily, even when heavily loaded, to allow headsail and sheet to run freely when tacking. Prevents fouled lines as well as chafe and wear on rigging, sails, and sheets. The hollow design also provides a very light weight (one pound for a 5ft section)Shroudrollers are 5 feet in length and packaged 2 sets to a pack, enough to cover a 10 foot length of shroud. Cat No.Price Wire Size O.DNE 24-22 $ 53.00/pr 3/16-1/4 15/16email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 417'