b'Teak $ All Prices in 283Canadian Dollars $Drawer FrontsWith frames. Solid teak with routed hand pulls. Can be used as solid door, vertical or horizontal, right or left opening. Cut out size is approx 1 (25mm) less than width and height#73012 x 6H (30.5 x 15.2 cm)$ 74.00#73215 x 7H (38 x 17.8 cm) 85.00#73418 x 8H (45.7 x 20.3 cm) 117.00#73621 x 9H (53.3 x 23 cm) 168.00Louvered InsertsTo mount in existing doors and bulkheads to ensure flow thru ventilation.Cut out size is approx. 1-1/4 (32mm) less than width & height 3/4 (19mm) thick.#7109-1/4 x 16H (23.5 x 40.6cm)$ 78.00#7129-1/4 x 7-1/2H (23.5 x 19cm) 55.95#71411-1/4 x 6-3/8H (28.5 x 16cm) 58.95#71617-3/4 x 9-3/8H (23.5 x 40.6cm)87.00Louvered DoorsWith frames. Size shown is frame outside. Door can be hinged right or left, cutout size approx 1 (25mm) less than the width and height. Door frame accom-modates #145 finger pull and most sizes of drawer pulls.#72012 x 12h (30.5 x 30.5 cm)$ 109.00#72112 x 15h (30.5 x 38 cm) 114.00#72212 x 18h (30.5 x 45.7 cm) 156.00#72312 x 21h (30.5 x 53.3 cm) 174.00#724 15 x 15h(38 x 38 cm)End view of #725 15 x 18h (38 x 45.7 cm) 169.00 Louvered Door #726 15 x 20h (38 x 50.8 cm) 179.00 with frame. #727 199.00 Both door and frame are rebated 3/8" in the depth 15 x 24h (38 x 61 cm)and 1/2" in the width.Offset Hinge-Solid Brass#201915 2-3/4"L x 2-1/8" W $5.50ea .Offset Hinge-Solid Stainless#201915SS 2-3/4"L x 2-1/8" W $6.00ea. email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 283'