b'Paints $ All Prices in 491Canadian Dollars $Pre-Kote Is a unique V.O.C. compliant, single package, undercoater for use with Brightside Polyurethane, Yacht Enamels or any one-part topside finish. Microspheres give Pre-Kote superior build and hide while improving flow and sandability. Use anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel. Available in both White and Gray. The use of Pre-Kote Gray is recommended for use under dark colours. White and Gray may be blended for use under intermediate colours.White #4279 $ 39.95 Gray #4280$ 39.95$ 49.00/qtBrightsidePolyurethane is a hard, high gloss one-part polyurethane topside finish. Excellent application characteristics yield that sprayed on look when brush applied in thin coats and is ideal for use anywhere above the true waterline. Brightside Polyurethane is easy to clean, resists staining and has great abrasion resistance. Hard, high gloss one part polyurethane finish With Fluro Microadditive for easy cleaning, resistance to staining and added abrasion resistance Range of bright, crisp colours Epoxy PrimekoteIs a multi-purpose two-part epoxy primer that is the recommended primer for use with two-part finishes such as Perfection Polyurethane and can also be overcoated with any Interlux topside paint. It is also used as part of a system to resurface cracked and crazed gelcoat prior to the application of topside paint and over clear epoxies to eliminate the effects of amine blush. Its bright white colour makes it ideal for priming bilge and locker areas.Suitable under all Interlux topside finishesCan be used to re-surface cracked and crazed gelcoat prior to the application of topside paintCan be used over clear epoxies as a sanding surfacer and to eliminate the effects of amine blushApplication by spray or roller/ brush#404/414-1L $ 53.00email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 491'