b'494 $ All Prices in Epoxy ResinCanadian Dollars $300 Mini Pumps are designed for convenient and accurate metering of all Group Size A, B and C WEST SYSTEM resin and hardeners. They mount directly on the resin and hardener containers and eliminate the mess involved with measuring by weight or volume. 300 Mini Pumps are calibrated to deliver the proper working ratio with one full pump stroke of resin for each one full pump stroke of hardener.#300ABC Mini Pump Set (for Group Size A, B or C)1 set (3 pumps) $ 23.95 PUMPS ARE REUSABLE 105 Resin is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without fisheyeing. 105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.#105A Resin 1 qt$ 53.95#105B Resin 0.98 gal 129.95206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.Pot life at 72F (22C): 20 to 25 minutesCure to a solid state: 10 to 15 hoursCure to maximum strength: 1 to 4 daysMinimum recommended temperature: 60F (16C)206A Slow Hardener 0.44 pt$28.95206B Slow Hardener 0.86 qt64.95205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.Pot Life at 72F (22C): 9 to 12 minutes Cure to a solid state: 6 to 8 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 40F (4C)205A Fast Hardener 0.44 pt$ 28.95205B Fast Hardener 0.86 qt 64.95494 email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639'