b'West System Epoxy $ All Prices in 497Canadian Dollars $Reusable syringes that can be loaded with epoxy mixture for injecting into tight spots. Ideal for hardware bonding and plywood repairs. Holds about 0.5 fl. oz.#807-2 Syringes$ 9.954" x 4" plastic spreader with 1/8", 3/16" and 1/4" notches on three sides for quickly applying modified epoxy at a constant rate.Useful when laminating large panels.#809WNotched Spreader $ 1.95A practical mixing, application, filleting, and cleaning tool. Squared, beveled end reaches mixing pot corners for thorough mixing and blending in fillers and for cleaning up excess epoxy. Use rounded end to shape 3/8" radius fillets. Cured epoxy pops off easily, so they can be reused many times. 3/4"-wide x 5-1/2". #804-8Mixing Sticks$ 6.95G/Flex EpoxyA toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with West System fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs.#650-8Liquid Epoxy 8oz kit$32.95Lightweight, seamless nitrile gloves are more chemically resistant than latex gloves. They provide excellent protection while retaining good finger sensitivity and dexterity and they are more puncture resistant than conventional disposable gloves.#832-4Gloves 4pk$ 9.49An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long-term bonds subject to high loads or moisture. One-to-one mixture, no pumps are required. Cures in 3-5 minutes.#865-45min Epoxy $ 31.00Git RotUnique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.#10634ozNLAemail: firstname.lastname@example.org: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 497'