b'Anchor Rollers $ All Prices in533Canadian Dollars $These rollers are designed to handle KINGSTON PLOW and LIGHTWEIGHT anchors up to 60lbs. They are made of heavy marine grade stainless steel plate and are extremely strong. They are electropolished to remove all surface impurities providing an attractive, bright finish that does not corrode and requires no maintenance. The roller wheel is made of tough nylon for long lasting life. Three positions are provided to secure the K-20 thru K-60 KINGSTON PLOWS.The BR-1 is a patented anchor roller designed specifically for retrofitting sailboats. The roller is offset mounted over the stem plate, using the existing bolts in the stem plate. The roller backing plate is drilled along one side to match the stem plate hole pattern, and the roller is bolted on. This stem plate mounting keeps the deck clear, and offsets the roller so the #BR-1$ 249.98 anchor does not interfere with the forestay. CS-1 Stainless Steel Chain Stopper - Easily mounts alone or within most Windline anchor roller to grip all type of chain from 1/4 to 3/8 - 5,000 lbs. working strength helps prevent damage to the windlass - Pawl flips up when not in use- Overall length: 3Overall width: 2.75 #CS-1$ 109.98Delrin Replacement Anchor Rollers is a copolymer that has an exceptional balance of tensile properties, shear strength, stiffness, and toughness. The toughness of this resin is evident in its high tensile yield strength. It is a natural bearing material because it exhibits a very low coefficient of friction against metals, and has excellent abrasion resistance.Dia.Wide#W2-16 2 x 1-11/16 3/8 Pin $ 42.98#W2-24 2 x 2.43/8 Pin 49.98 #W2-25 2 x 2.53/8Pin 59.98#W25-32-3/8 x 2-7/8 (CS30)68.98 #W3-353dia. x 3-3/8wide (CS36M)89.98Marithane Wheels Hand cast from an elastomer unmatched in ability to resit wear and distiortion at high loads. #W-25 2 1/2 X 1 3/4$ 82.98 #W-30 3 x 3.4 119.98 #W-40 4 x 3.4179.98#W-505 X 3.4 199.986-1/2 Stainless Steel Anchor Chute With Bronze Roller Heli-Arc Welded Stainless Steel and electropolished. Roller runs on S.S compression sleeve allowing roller to operate freely with axel nut fully tightened.LengthOutsideHeight RollerRollerFastener No. PriceWidth Diameter Width6-1/2 1-3/8 2-3/4 2-3/8 1-1/4 3/8 10299BR $ 26.98email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 533'