b'Paint $ All Prices in503Canadian Dollars $Pre-Kote Plus is a one-pack primer and undercoat that offers substrate protection and an ultra-smooth surface all in one. Use above the waterline. Can be applied to most substrates including properly prepared metal substrates Lower VOCs, easier to apply, and improved flow and aesthetics compared to Pre-Kote Thinning is not usually required, but can be thinned up to 10%. If thinned, may require an additional coat. Note that Reducing Solvent (Brush) Y2333N is recommended.C000White $ 56.98YUC001 Blue Grey$ 56.98Toplac Plus is a new premium gloss one part topcoat for all substrates above the waterline. Toplac Plus offers a professional quality finish that is easy to apply with exceptional roller application, without the need for tipping. The new, advanced formula provides highly durable UV protection for longer lasting gloss and color retention over time.Note that Reducing Solvent (Brush) Y2333N is recommended.$ 74.98/QT **all colours cost the same**Epoxy Primekote Is a multi-purpose two-part epoxy primer that is the recommended primer for use with two-part finishes such as Perfection Polyurethane and can also be overcoated with any Interlux topside paint. It is also used as part of a system to resurface cracked and crazed gelcoat prior to the application of topside paint and over clear epoxies to eliminate the effects of amine blush. Its bright white colour makes it ideal for priming bilge and locker areas. Suitable under all Interlux topside finishes Can be used to re-surface cracked and crazed gelcoat prior to the application of topside paint Can be used over clear epoxies as a sanding surfacer and to eliminate the effects of amine blush Application by spray or roller/ brush #404/414-1L $ 72.98email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 503'