b'Rigging Fittings $ All Prices in395Canadian Dollars $Quick Release Lever The Johnson Hyfield Type Lever has a number of very practical features that have been developed after extensive testing on both high performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 3500 Ibs. A positive stop is provided to prevent jamming fingers between fitting and wire when thrown open under load and the large surface area of the push pad makes it easier to close lever under load. Lever takeup is 2-1/8 to an over-center position and comes with a cotter pin for positive locking. A cross hole is provided for a 1/4 quick release pin if ultimate speed of release is required. The extender arm may be had in either 1/4 or 5/16 pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize, without it, another boat or extraordinary effort is required.Trailerable boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unsteppinq the mast.Cat No.Price No. OfMax.Closed Min.Min Pin Dia.Holes Length Length Extension Extender Chain Plate14-205 $ 116.99 3 8 7 3 1/4 1/414-206 119.99 4 8 6-1/2 3 5/16 1/4Stay Extender These stainless steel plates are designed for extending short stays, or to replace a turnbuckle. Several of these are a must for the ships kit.Cat No. Price Pin Dia. Max Pin to Pin16-204 $ 23.99 1/4 3-3/416-20533.99 5/16 4-3/816-20644.99 3/8 516-20869.99 1/2 5-5/816-210124.99 5/8 6-7/8Stainless Steel Circular Ring PinsNo. Price Ring Dia.#5/8CRA $ 3.99 5/8 w/hook 10 per pack No. Price Ring Dia. (Larger sizes in 5 #3/8CR $ 3.59/10pk 3/8 packs)#3910-21425.09/10pk 9/16#5/8CR3.99/10pk 5/8#7210-11827.09/10pk 3/4#7030-10827.29/10pk 7/8#3910-23428.09/10pk 15/16#3910-2442 9.99/5pk 1-3/16#3910-2552 11.09/5pk 1-1/2email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 395'